Table of Contents
Advertisement
UNI一T
19. Format SD
In the menu, short press the Up/Down button to select Setting, and then short
press the OK button to enter the submenu. In the submenu, short press the Up/
Down button to select Format SD and short press the OK button to enter the
setting interface. Press the OK button select Yes or No.
20. Device Info
In the menu, short press the Up/Down button to select Setting, and then short
press the OK button to enter the submenu. In the submenu, short press the Up/
Down button to select Device Info and short press the OK button to enter the
information viewing interface. T he device information including Code, Firmware,
Capacity and Available can be viewed.
<
Device Info
乏Model
， 一 ．
它
'Firmware
巳Capacity
Available
15
UTi712S User Manual
UT, 7 12S
Vl 9
14830MB
14812MB
UTi712S User Manual
21. Factory Reset
In the menu, short press the Up/Down button to select Setting, and then short
press the OK button to enter the submenu. In the submenu, short press the Up/
Down button to select Factory Reset and short press the OK button to enter the
setting interface. Press the OK button select Yes or No.
22. USB Communication and PC Analysis Software
1. Please refer to the instructions to download and install the PC software.
2. Connect the USB data cable to the computer. Users can view images and
analyze data via the PC software.
3. To use the PC software correctly, please read the Software User Manual.
4. During USB communication, do not directly unplug the USB cable. If users
want to disconnect the device when it has been successfully connected to the
computer, they can select Remove Device in the lower right corner of the
computer.
23. Maintenance
Use a wet cloth or weak soap solution to clean the outer shell of the device. Do
not use abrasives, isopropyl alcohol or solvents to clean the outer shell, lens or
window.
UNl-"'I:
16
Advertisement
Table of Contents
