Advertisement
OPERATION
Intelligent Bypass: The Helios Overdrive V2 is equipped with an intelligent
bypass system, which will recognize the time of pressing the footswitch and
automatically activate the momentary bypass function. Therefore, pressing
the footswitch quickly will do the normal function of reversing the bypass
state, pressing and holding the footswitch for more than 500ms when
releasing the bypass will return to the state before it was pressed, performing
the momentary bypass function.
Change Clipping: Press both footswitches at the same time.
Change MIDI channel: When turning on the pedal power, keep the preset
footswitch pressed and the Preset LED will light up, turn the Time knob and
the LED color will change, thus indicating the channel change, as follows:
Blue: Channel 1; Green: Channel 2; Red: Channel 3; White: Channel 4.
LED GUIDE
Bypass LED: When lit indicates the effect is on and its color indicates which
preset bank is selected.
Green
Bank 1;
Preset LED: Its color indicates which preset is selected.
Preset 2;
Red
Preset 3;
Pink
Preset 4;
Clipping LED: Its color indicates which clipping mode is selected. Blue: Silicon;
Red: Germanium; Green: Led's; White: Mosfet.
VTR EFFECTS – HELIOS OVERDRIVE V2
Red
Bank 2.
Blue
Preset 1;
Green
Yellow
Preset 5;
White
Preset 6.
TECHNICAL SPECIFICATIONS
•
Electrostatic painting in beige color.
•
Measures: 12.3 cm x 6.5 cm x 3.5 cm.
•
Weight: 465 grams.
•
Superior finishing through UV Printing (Ultra Violet).
•
True-bypass by relay.
•
Low/mid gain overdrive.
•
Organic and dynamic tone.
•
Controls: Volume, Tone, Bass and Gain.
•
Input Impedance: 1MΩ.
•
Output Impedance: 10KΩ.
POWER SUPPLY
• Minimum current of 100mA.
• Please use a negative center 9V DC source, and preferably for isolated
sources to minimize any source of noise.
Page 5
Advertisement
