Appendix A Specifications - TSI Instruments BlueSky 8145 Operation And Maintenance Manual

Appendix A
Specifications*
PM Sensor
Sensor Type ...............
Aerosol Concentration
Range .........................
Measurements ...........
Resolution ..................
Counting Efficiency ....
Accuracy ....................
Zero Stability ..............
Sample Flow Rate ......
Response Time ..........
Start-up Time .............
Optimal Temperature
(1)
Range ......................
Optimal Humidity
(2)
Range ......................
Storage Temperature .
Acoustic Emissions
Level ...........................
Carbon Dioxide (CO
Sensor Type.............
Range.....................
Accuracy..................
Resolution ..................
Optimal Temperature
(1)
Range ......................
Optimal Humidity
(2)
Range ......................
Light scattering single particle counting
0 to 1000 μg/m
PM1.0, PM2.5 PM4.0, and PM10 on SD Card
and PM2.5, PM10 on Cloud
3
1 µg/m
50% at 0.3 µm and 98% at 0.5 µm
±10 % @ 100 – 1000 µg/m
to a DustTrak™ DRX monitor
3
±1 µg/m
~ 0.3 L/min
1 second (sensor sampling frequency, not an
indicator of reporting interval)
< 8 seconds
-10 to 60ºC
0 to 95% non-condensing
-40 to 70ºC
25 dBA @ 0.2 m
) Sensor
2
NDIR (Non-dispersive Infrared)
0 – 10,000 ppm
± (30 ppm + 3% of reading)
1 ppm
0 to 50ºC
0 to 95% non-condensing
3
3
when compared
45