Page 2
SAFETY NOTES Read the user’s manual before using the equipment, mainly "SAFETY RULES" paragraph. The symbol on the equipment means "SEE USER’S MANUAL". In this manual may also appear as a Caution or Warning symbol. WARNING AND CAUTION statements may appear in this manual to avoid injury hazard or damage to this product or other property.
The 1Gb network port allows MOI Smart box to deliver about 800M video streams over the network simultaneously. The CA card reader slot in TBS2925 MOI Smart box is an essential part to enable users to handle encrypted DVB channels.
1Gb onboard Ethernet USB2.0 2 * USB2.0 port HDMI 1 * HDMI2.0 Out PCIe Slot 1 x PCIe slot in TBS2925-1 2 x PCIe slot in TBS2925-2 UART 1 x LCD Display 12V/3A external PSU for TBS2925-1 12V/4A internal PSU for TBS2925-2...
2. System Connection and Log in ➢ Connect TBS2925 MOI Smart Box to the router and turn on. It will show its IP address on the LCD. ➢ Connect another PC to the same LAN. It is recommended to try a ping on the command-line interface to confirm the PC and TBS2925 are on the same network range and communication between them is possible.
3. Network setting The server’s network parameters can be re-set in the “Network Settings” page. Please don’t forget to click “Save” to keep all the new setting. 4. Stream channels setting The system is embedded several third-party software for streaming the channels: TVheadend, DVBlast and so Address: East Room, 3/F Bldg.
4.1 Use TVheadend to stream the channels When TVheadend is selected to stream the channels, TVheadend webpage will pop up in a few seconds. For the TVheadend user guide, please click: 4.2 Use DVBlast to stream the channels 4.2.1 Scan channels Following is a sample to use TBS6904SE DVB-S/S2/S2X Quad tuner card to capture some free satellite channels.
Page 9
Adapters: Choose TBS6904SE DVB-S/S2/S2X adapter 0-3 (tuner). Frequency (kHz): Enter the transponder’s frequency value here. Symbol Rate (Sym/s): Enter the signal’s symbol rate value here. Polarisation: Choose V or H, according to the signal’s condition. Delivery system: Choose DVBS2. (If use TBS6205 DVB-T/T2 to capture terrestrial channels, here should choose DVBT) Modulation: Choose the signal’s Modulation here.
Page 10
Ther are 3 options in the drop-down menu of IP. If choose "auto", the system will assign an IP address for streaming. ➢ If tick ”UDP”, the coming out stream will be UDP, and the address will be udp://@239.255.0.2:1234. ➢ If you deselect ”UDP”, the coming out stream will be RTP, and the address wil be rtp://239.255.0.2:1234.
4.3 Firmware update Go to “Update” page, upload the new firmware, then click “update”. To get the latest system firmware, please contact support@tbsdtv.com Address: East Room, 3/F Bldg. B, Xinghong Industrial Park, Shuiku RD., Xixiang Town, Bao’an District, SZ, China, 518055 11 / 12...
5. Maintenance 5.1 Instructions for returning by mail ➢ Instruments returned for repair or calibration, either within or out of the warranty period, should be sent with the following information: Name of the Company, name of the contact person, address, telephone number, receipt (in the case of coverage under warranty) and a description of the problem or the service required.
Need help?
Do you have a question about the TBS2925 and is the answer not in the manual?
Questions and answers