Suunto D6 User Manual page 78

Suunto watch user's manual d6
Table of Contents

Advertisement

NOTE
Higher Altitude and conservative Personal Adjustment settings will shorten the no-
decompression time limits. These limits at different Altitude and Personal Adjustment
setting selections are explained in Section 5.9.4. Diving at altitude and in Section 5.9.5.
Personal adjustments
Dive numbering shown during dive planning
Dives belong to the same repetitive dive series if the instrument was still counting
down the no-fly time at the beginning of the dive.
The surface interval must be at least 5 minutes for a dive to be considered a repetitive
dive. Otherwise, it is considered a continuation of the same dive. The dive number
will not change and the dive time will continue where it left off. (See also Section 7.1.2.
Dive numbering ).
Dive logbook (MEMlog)
The Suunto D6 has a very sophisticated, high capacity Logbook and Profile Memory.
The data is recorded in the profile memory based on the selected sample rate. Dives
shorter than the recording interval are not registered (see Section 5.8.5. Setting the
sample rate).
78
The Planning mode is disabled in GAUGE mode and in Error
mode (see Section 5.7. Error conditions). The planning mode
calculates no-decompression times for MIX1 only. If an additional
mix is enabled in the NITROX mode, it does not affect the
calculations in MEMplan mode.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents