Using Your Toaster - Sunbeam 3831 User Manual

your toaster
Your Toaster

Using your Toaster

• Before use remove any stickers and wipe the body
of your toaster with a damp cloth.
• Ensure that before plugging the toaster into the
outlet, the bread carriage lever is in the resting
position.
• Plug the cord in 120/127 volt, 60 HZ AC outlet.
Position toaster at least 3 inches away from wall
or rear of counter.
• Let the first toasting process take place without
inserting any bread to preheat the new elements
and burn off any dust, which may have
accumulated during storage.
• Select the desired level of darkness by turning the
"1-7" light/dark knob on the front panel of the
toaster to higher numbers for darker toast and to
lower numbers for lighter toast. Your selection
should vary based on the moisture content,
thickness of bread, whether fresh or frozen and
your darkness preference.
• Next, place bread in slot and depress bread carriage
lever downwards until it locks. Carriage lever will
not stay down if toaster is not plugged in. The self-
adjusting bread guides will automatically center the
bread for even browning.
• After the desired level of darkness has been
reached, the bread will pop up automatically and
is ready for removal from the slots. The bread
carriage will return to its original position and
disconnect the elements, ready for the next toasting.