Table of Contents
Advertisement
Quick Links
BY
PICTURE BOOK
SHELVING
PBS42SB
PBS48SB
SINGLE BASE UNIT
I M P O R TA N T !
Assembly may require the assistance of
another person.
Before you begin assembly:
READ THE DIRECTIONS all the way through one
time. This will speed up the process and help you
understand the sequence of steps.
COUNT THE PARTS AND HARDWARE before
assembly. This ensures you have received all
necessary parts before you begin.
TOOLS: You may need a Phillips head screwdriver,
a medium slotted screwdriver or a plastic mallet. To
protect your new furniture from damage during
assembly, it is recommended to work on a
carpeted surface.
01/05
In the event any parts are missing from
this package, send your name, address,
telephone number, and a description of
the missing part(s) to: PARTS, Box 1420,
Missoula, MT 59806 or call:
1-800-769-5693 or FAX 1-800-445-5281.
CAUTION: On assemblies requiring glue, make
sure the unit is assembled correctly before gluing.
Once this unit is assembled with glue, the
manufacturer will not be responsible for damaged
parts. Keep a damp cloth or sponge handy to wipe
off excess glue.
To care for this furniture, simply wipe with a cloth
dampened with glass cleaner containing ammonia-D.
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Ironwood GLACIER PBS42SB
Summary of Contents for Ironwood GLACIER PBS42SB
- Page 1 PICTURE BOOK SHELVING PBS42SB PBS48SB SINGLE BASE UNIT I M P O R TA N T ! In the event any parts are missing from Assembly may require the assistance of this package, send your name, address, another person. telephone number, and a description of Before you begin assembly: the missing part(s) to: PARTS, Box 1420, Missoula, MT 59806 or call:...
- Page 2 PARTS & HARDWARE 01020102 1 ea. Left Side - PBS42SB 01020141 1 ea. Left Side - PBS48SB 01020341 1 ea. PBS42SB 2 ea. Shelves 01024724 PBS48SB 3 ea. 01020141 1 ea. Right Side - PBS42SB Right Side - PBS48SB 01020341 1 ea.
- Page 3 If you have purchased an Adder unit to be assembled in conjunction with this Base unit, it is important to read all the way through the Adder instructions (enclosed in the Adder carton) before beginning. It will be necessary to substitute a Divider (J) for a Right Side (B) during assembly.
- Page 4 USING THE TAB-V SYSTEM: Using a plastic mallet, tap in the plastic housings with the flat edge facing outwards until flush with the surface. IMPORTANT! The flat edge of the plastic FLAT housing must be EDGE aligned with the shelf edge.
- Page 5 Refer to “Using the Tab-V System” on the 4th page of these instructions. Insert four Tab-V Plastic Housings (H1) into the Top (C) so that the flat edge is facing outwards. Using a plastic mallet, tap the housings until flush with the surface. The flat edge of the plastic housing must be aligned with shelf edge.
- Page 6 With the assistance of another person, Place the Right Side Panel (B) on a clean, set the Panel and Frame assembly carpeted surface as shown. Attach the upright and install the Left Side Panel Metal Frame (H6) on the back edge of the (A) to the other side of the Metal Frame, panel using five Panhead Screws (H3) using five Panhead Screws (H3)
- Page 7 Chose the height for the remaining Shelves (D). 42” Unit: Midway is recommended for the single remaining shelf. FINISHED EDGE 48” Unit: Placement of the two remaining shelves must allow for the installation of the Wire Dividers. Insert Tab-V Shelf Pins into the holes corresponding to your chosen shelf heights.
Need help?
Do you have a question about the GLACIER PBS42SB and is the answer not in the manual?
Questions and answers