Unitech MS852LR Quick Start Manual

USB Device Type
USB Keyboard HID*
Symbol Native API (SNAPI)
without Imaging Interface
Reading Mode
Trigger (Level) *
Presentation (Blink)
Host
Auto Aim
Auto Aim with Illumination
* ：Default Option
Thank you for purchasing the unitech product.
For other product documentation, please scan the QR code for more information.
Symbol Native API (SNAPI)
with Imaging Interface
USB HID POS
(for Windows 10 devices only)
Beep After Good Decode
Enable Beep After Good Decode *
Beep Volume
High Volume*
Beep Tone
High Beep Tone
MS852LR
Connecting the Scanner
Connect USB cable to the USB 3.0 port of a host PC.
SSI over USB CDC
USB CDC Host
Medium Volume
Medium Beep Tone*
2D Long Range Barcode Scanner
Quick Start Guide
Note : Y cable is designed for the PC
or notebook without USB 3.0
port in order to get additional
power supply from two USB 2.0
ports. Or you can connect
MS852LR to a USB 3.0 port
directly without Y cable.
Factory Default
Display F/W Version
Disable Beep After Good Decode
Low Volume
Low Beep Tone
Disable Beep Tone
Version 1.0
608556G