Double Insulation; Overheat Protection - Hyundai HMBE1004F Original Instruction

should be at least 1.5 mm
harmonized cable.
Before starting up
Intend use
This appliance is only intended as an electric
tiller for aerating lawns and grassy areas in
private domestic and hobby gardens.
It is not designed for use in public areas, parks,
sports areas, and in agriculture and forestry.
Using the application for any other purpose is
considered incorrect and unapproved. The
manufacturer is not liable for any damage or
injury resulting from such use. The user is entirely
responsible for any associated risks.

Double insulation

The application has double insulation. This
means that all external metal parts are insulated
from the electrical supply.
This is achieved by introducing an insulation layer
between electrical and mechanical parts. The
double insulation guarantees you the greatest
possible safety.

Overheat protection

If the application is blocked by a foreign object or
if the motor is overloaded, the motor will switch
off automatically by the protection device.
Release the trigger level and wait till the motor
cool down (approx. 15 minutes) then start
application again.
Electric/Mechanical break system
This application is equipped either with electric
break system or mechanical system to ensure the
rotating tines stops within 2 seconds after
releasing of safety switch.
Assemble
(Fig. 1)
Guide bar
Slide the upper guide bar (25) into bracket (26)
till the positition that holes on bracket align
with the one on guide bar.
. Use H07RN-F
2
15
Tighten the bracket after setting at the
appropriate position by 2 supplied screws
using a screwdriver.
Attach the handle bar (25) to the guide bar
middle section (29) and fix by two supplied
screws (27) and swing nuts (30).
Mount guide bar (29) to lower section (32) and
fix by two supplied screws (27) and swing nuts
(30).
Tighten all screws and nuts completely.
Using supplied two cable clips (28) to hold
cable.
Additional wheels
Install the wheels (35) to the bar lower section
(32) and fix by supplied screw (33) and swing nut
(45).
The setting of the height determines the working
depth. The longer the setting, the deeper the unit
will work in the earth.
Turn up side the wheels during working position
reach the maximum working depth (Fig. 4).
Starting
Connection the mains
Secure extension line with cable relief (26) and
connect the mains plug of the appliance.
The loop of the mains wire must be long enough
for the cable relief to be able to slide from one
side to the other.
Starting up
(Fig. 3)
Warning! The tines starts rotation immediately
after switch on! Keep hands and feet away from
cutting tines.
To switch ON, hold the appliance firmly with
two hands and press the Safety lock off button
(A) while press the On/Off switch trigger (B).
Keep the switch trigger hold while release the
button.
To stop the appliance, release the trigger level
and it automatically returns to its start position.
Use the tiller for breaking sod, preparing
seedbeds, and for cultivating gardens and flower
(Fig. 2)