Rev; Static Electricity Tolerance (Esd); Ac Line Noise Tolerance; Vibrations, Falling Shocks - Star Micronics TUP900 Series Specification Manual

5-2 Static Electricity Tolerance (ESD)

Direct Electrical Discharge:
Indirect Discharge:
Note) When using the optional power adapter (PS60L – 24A).

5-3 AC Line Noise Tolerance

±1200 V (individual unit)
±500 V (Checker connection)
Note) When using the optional power adapter (PS60L – 24A).

5-4 Vibrations, Falling Shocks

5-4-1 Vibration Test (When Packaged)

(1) Vibration Waveform:
(2) Vibration Frequency:
(3) Total Amplitude:
(4) Acceleration Speed:
(5) Direction:
(6) Time:
(7) One-side Sweep Time:

5-4-2 Drop Test (When Packaged)

(1) No. of Drops:
(2) Height of Drop:
(3) Order of Drops:

5-5 Dust

There is no affect on operation in a normal office environment.
TUP900 Series Specifications Manual
Contact discharge ±6 kV (individual unit)
Air discharge ±8 kV (individual unit)
±6 kV (individual unit)
±4 kV (Checker connection)
Sine wave
10 to 55 to 10 Hz
1.54 mm (constant)
0.3 to 9.3 G
Three directions of X, Y and Z
2 hours in each direction
5 minutes
10 times
1 angle; 3 corners from 85cm; 6 surfaces from 1m
1 angle → 3 corners → 6 surfaces
5-2

Rev 0.01