Star Micronics NP-215 Specifications page 33

28) Barcode print
Code
Description : Selects barcode symbology and prints barcode.
* The next print start position is on the line head
* Select following barcode symbology with "n" value.
* Dn indicates the character code to be printed.
n (Hex)
00
01
02
03
04
05
06
07
* When there is data in the buffer this command is neglected.
* If character code Dn is not a printable character, following data after Dn will be treated
as normal data.
* If the print character numbers are fixed in the barcode symbology the input character
numbers should match to the print character numbers.
* If horizontal data exceed one line, the exceeded data cannot be printed.
29) Barcode width size select :<< GS w n >>
Code
Description : Selects width of barcode
* Default value of "n" is [03]h.
30) Barcode height select
Code
Description : Selects barcode height
* "n" shows the vertical dot number
* Default value of "n" is 162([A2]h).
31) Select of HRI character print position
Code
Description : Selects the print position of HRI characters in printing barcode.
* "n" has the following meaning.
n (Hex)
00
01
02
03
* HRI characters are the characters selected by "HRI character style select".
* Default value of "n" is [00]h.
32) Select of HRI character style
Code
Description : Selects HRI character style in printing barcode
* "n" has the following meanings:
n (hex)
00
01
* Default value of "n" is [00]h.
:<< GS k n Dn NUL >>
: < 1D >h + < 6B >h + n + Dn + < 00 >h
Barcode symbology
UPC-A
UPC-E
EAN-13 (JAN-13)
EAN-8 (JAN-8)
CODE 39
ITF
CODABAR
CODE128
: < 1D >h + < 77 >h + n
:<< GS h n >>
: < 1D >h + < 68 >h + n
: < 1D >h + < 48 > h +n
Print position
No printing
Above barcode
Below barcode
Above and below barcode
:<<GS f n>>
: <1D>h+<66>h+n
Style
Font A
Font B
* < 02≤n≤04 >h
* < 00≤ n ≤FF >h
:<< GS H n >>
* < 00≤ n ≤03 >h
* < 00≤ n ≤01 >h
30
* < 00≤n≤07 >h