Advertisement
Quick Links
Advertisement
Related Manuals for DIGITAL YACHT GPS160F
Summary of Contents for DIGITAL YACHT GPS160F
- Page 1 GPS160F (Furuno Compatible) POSITIONING SENSOR...
-
Page 2: Installation
The 1” x 14 TPI thread mount can also be removed by unscrewing the three hex bolts with a suitable Allen Key, allowing the GPS160F to be flush mounted on a flat horizontal surface. A mounting kit (as shown in the diagram below) is available from Digital Yacht (Part# X500.400). - Page 3 Yellow NMEA Out + Green NMEA Out – If the GPS160F is to be powered directly from the boat’s DC supply, then White NMEA IN+ a 1 Amp fuse should be fitted in the positive power feed. The unit requires 9.6V to 30V supply voltage and consumes 30mA at 12v.
-
Page 4: Wiring Diagrams
Figure 1 below. The connections should be made in a dry location and Digital Yacht do sell a Junction Box (JB1) that can be used to make a professional and reliable connection between the two cables. - Page 5 Wiring for GP160F to connect to the newer 7 Pin Data Cables (MJ-A7SPF0007-050C and MJ-A7SPF0009-020C) Figure 2 Wiring for GP160F to connect to the older 7 Pin Data Cable (MJ-A7SPF0003-050C) Figure 3 Quick Start Guide for GPS160F V1.00 TEL + 44 1179 554474 www.digitalyacht.co.uk sales@digitalyacht.co.uk...
- Page 6 Wiring for GP160F to connect to the 6 Pin Data Cable (MJ-A6SPF0003-050C) Figure 4 Wiring for GP160F to connect to the 10 Pin Data Cable (MJ-A6SPF0003-050C) Figure 5 Quick Start Guide for GPS160F V1.00 TEL + 44 1179 554474 www.digitalyacht.co.uk sales@digitalyacht.co.uk...
-
Page 7: Technical Specification
NMEA-0183 Version 2.3 NMEA messages DTM, GBS, GNS, GRS, GSA, GSV, RMC, VTG and ZDA Power Input VDC +9v to 34v Cable White 10m Shielded Cable (4.5mm OD) Quick Start Guide for GPS160F V1.00 TEL + 44 1179 554474 www.digitalyacht.co.uk sales@digitalyacht.co.uk...
Need help?
Do you have a question about the GPS160F and is the answer not in the manual?
Questions and answers