Table of Contents
Advertisement
Available languages
Available languages
Product overview
1
Ventilation slots
2
Spindle lock button
3
Depth clamping knob
4
Depth scale
5
Parallel guide
6
Saw blade safety guard
7
Dust extraction port
8
Parallel guide clamping knob
9
Bevel angle adjustment lock knob
10
Saw blade clamp washer
11
Parallel guide slide in
12
Power cord
13
On/off switch
14
Lock-off trigger
15
Lower guard lever
16
Base plate
Intended use
The tool is designed for longitudinal cutting of
solid wood, wood-like materials and plastics
when equipped with appropriate saw blades,
or - when connected to a suitable dust extrac-
tion system - for dry cutting of mineral materi-
als, e.g., masonry. The tool is not intended for
commercial use.
Any other use or modification to the tool is
considered as improper use. The producer is
not responsible for any damage or injuries that
may result of it.
104
EN
Using the tool
1. Check the correct function of the base
plate 16
before plugging in the power cord.
2. Choose a corresponding saw blade and
check its condition and sharpness.
3. Make sure you keep the ventilation
clear when holding the tool.
4. To switch on the tool, press the lock-off trig-
ger
14
and press and hold the on/off switch
13. When the saw blade has reached maxi-
mum speed, slowly push the tool forward
through the safely fixed workpiece.
5. Make sure the base
evenly on the workpiece.
6. To switch off the tool, release the on/off
switch 13.
Caution! Do not overheat the blade
tips of the saw blade.
slots 1
plate 16
always rests
Advertisement
Chapters
Table of Contents
