Technical Data; Noise & Vibration - Hornbach Pattfield PSC120M1 Manual

Technical Data

Nominal voltage
Rated power
No-load speed (n
Blade dimensions
Blade bore
Max. cutting depth at 90° (Wood)
Max. cutting depth at 45° (Wood)
Bevel capacity
Weight
Protection Class
Sound pressure level (L
Sound power level (L
Max. vibration emission (a
The values given are valid for nominal voltages U of 120 V. For lower voltage and models for
specific countries, these values may vary.
Please observe the article number on the type plate of the tool. The trade names of the individual
tool may vary.
Noise & Vibration
The declared vibration total value and the de-
clared noise emission values have been meas-
ured in accordance with a standard test meth-
od (EN 62841) and may be used for comparing
one tool with another. The declared vibration
total value may also be used in a preliminary
assessment of exposure.
Warning! The vibration and noise
emission during actual use of the
power tool can differ from the declared to-
tal value depending on the ways in which
the tool is used, in particular, what kind of
work piece is machined.
102 EN
)
0
)
pA
)
WA
)
hw
220-240V~ 50Hz
750 W
4700/min
ø 120 mm
ø 9.5 mm
45 mm
28.5 mm
0-45°
2.76 kg
/ II
95 dB(A) / Uncertainty K = 3 dB(A)
106 dB(A) / Uncertainty K = 3 dB(A)
7.7 m/s / Uncertainty K = 1.5 m/s
2
Warning! It is necessary to identify
safety measures to protect the op-
erator that are based on an estimation of
exposure in the actual conditions of use
(taking account of all parts of the operating
cycle such as the times when the tool is
switched off and when it is running idle in
addition to the trigger time).
Try to minimize the impact of vibration and
noise. Exemplary measures to reduce vibra-
tion exposure include wearing gloves while
using the tool, limiting working time, and us-
ing accessories in good condition.
2