Table of Contents
Advertisement
Mounting
7.3 Assembly and disassembly with different mounting systems
Mounting the direct-on-line starter (size S2)
The figure below shows the work steps for mounting the direct-on-line starter in size S2.
①
②
③
④
Figure 7-45
98
/
Hook the feeder into the upper hooking position of the motor starter protector, and swivel the
feeder to the busbar adapter.
Press the lock on the contactor down using a screwdriver, and push the feeder onto the DIN rail
of the busbar adapter.
Insert the connecting cables into the corresponding main conductor terminals. Screw the main
conductor terminals tight.
Mounting on the busbar adapter (direct-on-line starter, screw-type connection system, size
S2)
Equipment Manual, 02/2022, A5E03656507520A/RS-AC/004
SIRIUS 3RA Load Feeders
Advertisement
Table of Contents
