Disassembling the DIN rail adapter from the DIN rail
The procedure for disassembling the DIN rail adapter with mounted direct-on-line starter of
size S2 is shown in the figure below. You require a screwdriver for disassembling.
①
②
③
The procedure for disassembling the DIN rail adapter with mounted reversing starter of size S2
is shown in the figure below. You require a screwdriver for disassembling.
SIRIUS 3RA Load Feeders
Equipment Manual, 02/2022, A5E03656507520A/RS-AC/004
7.3 Assembly and disassembly with different mounting systems
Press the locking device down with a screwdriver. Then push the DIN rail adapter with mounted
feeder forwards against the pressure of the mounting spring.
Pull the DIN rail adapter with mounted feeder forwards with a swivel action.
Press the DIN rail adapter with mounted feeder upwards and remove the DIN rail adapter with
mounted feeder from the DIN rail.
Mounting
79