Cleaning And Maintenance - Fakir ULTIMO User Manual

NOTE!
To get a good result on curly, thin or long hair, we recommend you to use a comb to guide
the hair towards the appliance.
To give style to your beard, move your appliance on the opposite direction of beard growing.
Make sure that the surface of the comb is always in full contact with the skin. Since not all
beards grow in the same direction, you can try different cutting positions (for example; up,
down or cross). You can get the most appropriate results when you get used to using the
product.
Cutting Without Combs
NOTE!
Be careful when using it without comb since your appliance will cut every hair it contacts.

Cleaning and Maintenance

• Clean your appliance after each use.
• Before cleaning, turn OFF your appliance, unplug it and disconnect the power cord.
• Never immerse your appliance in water or rinse it under tap.
• Do not clean your appliance and plug-ins provided with the appliance by using abrasive
cleaning agents, wire or abrasive liquids such as alcohol, gasoline or acetone.
• Do not clean, replace or remove the combs when the appliance is ON.
• Do not press on the cutters of the appliance.
Remove the comb for the following cases:
• While making the beard lines clear
• When making cutting in the neck area
• To cut single, unwanted hair
• Make sure that your appliance is powered OFF.
• Make sure that no beard trimming comb is attached to your
appliance.
• Turn your device ON.
• Cut with controlled movements and slightly touch the beard/skin
with your appliance.
29
EN