Optimizing Service Life Of Battery - Fakir ULTIMO User Manual

Charging
Completely charge the Hair Clipper and Beard Trimmer and Styling Appliance before first use
or after long period of non-operation.
Charging or using the Hair Clipper and Beard Trimmer and Styling Appliance at temperatures
under 4°C or above 35°C negatively affects the battery life.
• If your appliance has been exposed to a significant change in terms of temperature, pressure
or humidity, wait for 30 minutes before use to enable it fit in the environment.
• Continuously charging your appliance will reduce the usage life of the battery.
For charging;
• Make sure that your appliance is powered OFF.
• Insert one terminal of the adapter directly into your appliance and the cord to a 220V AC
50/60Hz socket. Only use the cord provided with the appliance.
• Charge indicator light turns red to show the charging of your appliance.
• You can use your appliance without cord approximately for 60 minutes after a full charging
of your appliance. It takes 10 hours for full charging.
• Disconnect the cord and unplug after the appliance is charged.
WARNING!
Your appliance obtains optimum power after 3 or 4 times of 10 hours charging cycle. 8
hours will be sufficient for the following charging processes.

Optimizing Service Life of Battery

• After you charge your appliance for the first time, do not charge it between the cutting
operations again. Continue to use until the battery is fully discharged.
• Being charged for more than 24 hours may damage your battery.
• Do not always leave the cord connected.
• For twice a year, completely discharge the battery by running the motor until the motor
stops.
• If your appliance has not been used for a long time, it must be completely charged for 10
hours.
NOTE!
Your appliance can be used both wired and wireless.
27
EN