Related Manuals for Metaform PICO HYBRID
Summary of Contents for Metaform PICO HYBRID
- Page 1 USER MANUAL Part List and Assembly Instructions Including: 1.75mm Direct Drive Setup Bowden Setup Direct Drive Setup Additional Part Fan Nozzle Changing...
- Page 2 Small Phillips Screwdriver 0.9mm and 2mm 7mm and 11mm Small Parts Bowden Coupler Bowden Clip Direct Drive Plug PTFE Tubing Pico Hybrid Assembly 1.75mm and 3.00mm 2x4mm and 3x4mm Fan Voltage Regulator Voltage Regulator Wiring Harnesses Heat Break Cooling Fan Thermistor...
- Page 3 NOTE: Some direct drive extruders require longer PTFE tubing than what is provided with the Pico Hybrid. In this case, you can purchase any 1.75mm x 4mm PTFE tubing for use with your extruder.
- Page 4 Regulator. Ensure the correct polarity by matching the coloring of wires between each plug. Heater Harness Thermistor Harness Heat Sink Fan Please refer to the wiring diagrams on the User Guides page of the Metaform website for wiring the hotend to the printer.
Need help?
Do you have a question about the PICO HYBRID and is the answer not in the manual?
Questions and answers