Easy Camp Chilly 600029 Instruction Manual page 2

UK: INSTRUCTION
PLEASE READ THESE INSTRUCTIONS CAREFULLY BEFORE USE
INTENDED USE
The appliance is intended for camping use.
Antibacterial effect:
This product has been treated with a biocidal product (Silver-zinc-aluminum-boron phosphate-glass),
which has an antibacterial effect.
Work Performance:
• Food may only be stored in its original packaging or in suitable containers.
• For optimum cooling we advise using pre-chilled food and drink.
• Unchilled food and drink will take 2-3 hours to cool depending on volume and ambient temperature.
• The warming function is not designed to heat cold food but to help maintain hot food at a warm
temperature.
• Opening the lid for long periods can cause a significant increase of the temperature in the compartments
of the appliance.
• Surfaces that come in contact with food and accessible drainage systems should be cleaned regularly.
• Store raw meat and fish in suitable containers in the refrigerator, so as to avoid any contact with or drippng
onto other food.
Operation Guide:
• Ensure the switch at the back of the coolbox is in OFF position.
Use with 12V supply, such as a car battery (DC12V)
• Insert the DC12V power cord into the vehicle's appropriate power/lighter socket.
• Insert the power cord into the coolbox DC12V socket.
230V/12V model use with mains power supply, such as electric hook-up or at home (AC200V~240V)
• Connect the AC power cord (household power cord).
• Insert the power cord into the coolbox AC socket.
Coolers with the additional cooling feature:
• Connect the corresponding cable to the required voltage.
• For fast cool down switch to MAX on the cool box. Please be aware that doing so you will not run on ECO
mode. We advice that the ECO function is primarily used.
• Push the switch on the control panel to HOT or COLD to switch the cooler on.
• The indicators on the control panel show you the operating mode.
If this box runs on 12V Max mode is not possible. If it runs on 230V both Max and Eco mode is possible.
• Cooling: set the power switch in the COLD position. The green indicator will light up to show the unit is in
cool mode.
• Heating: set the power switch in the HOT position. The red indicator will light up to show the unit is in
heat mode.
Replacing the DC plug fuse (12V)
• Unplug the cable from the 12V socket and cooler.
• Turn the plastic cap anticlockwise. Remove plastic and metal cap. Replace fuse with a new one that has the
same rating (T6,3A/250V).
• Re-assemble the plug in the reverse order.
Replacing the AC plug fuse (220-240V)
• Unplug the cable from the mains socket and the cooler.
• Unscrew the large screw in the centre of the plug. Remove back cover. Replace fuse with a new one that
has the same rating (BS 1362 /3A).
• Re-assemble the plug in the reverse order.
2