Page 1
Triple Mount Mast Bracket Installation Guide (TM-01) DISCLAIMER: The installation, maintenance, or removal of an antenna requires qualified, experienced personnel. You must refer to the app ropriate local safety codes and ensure proper electrical and electromagnetic compatibility before proceeding with the installation. All local codes shall take precedence over information in this document.
Page 3
Triple Mount Mast Bracket Installation Guide (TM-01) Fig. 3: Single Hinge Bracket Mounting to Clamps Fig. 4: Dual Hinge Bracket Mounting to Clamps Step Task Step Task Fasten a Dual Hinge Bracket (Item 2) to each Single Hinge Bracket (Item 3) Attach a Single Hinge Bracket (Item 3) to each pair of clamps using M10 hardware (Items 8, 9, and 10) as shown in Fig.
Page 4
Triple Mount Mast Bracket Installation Guide (TM-01) Fig.6: Antenna #1 Installation Fig.5: Antenna #1 Alignment Step Task Step Task Tighten M10 hardware holding hinge brackets (Item 2 & Item 3) to clamps Install Antenna #1 on to the Single Hinge Brackets (Item 3) using M10 (Item 1) and torque to 54 N·m (40 f t·lbs).
Page 5
Triple Mount Mast Bracket Installation Guide (TM-01) Fig. 9: Antenna # 3 Installation Fig. 8: Antenna # 2 Installation Step Task Step Task Install Antenna #2 on to Dual Hinge Brackets (Item 2) using M10 Install Antenna #3 on to Dual Hinge Brackets (Item 2) using M10 hardware hardware (Items 8, 9, and 10) as shown in Fig.