Fig. 1: 2-Axis Adjustable Mast Bracket BOM
ITEM
QTY
DESCRIPTION
1
1
ANTENNA MAST BRACKET, ADJUSTABLE, METRIC, MBK-14
2
4
WASHER, M5, SPLT LK, SS
3
4
SCREW, PPH, M5-0.8 X 12L, DIN 127B SS
4
4
WASHER, M6, SPLT LK, STEEL
5
4
NUT, HEX, M6x1, DIN 934, CLASS 8, STEEL
Step Task
1
The 2-Axis Adjustable Mast Bracket can be wall mounted (using appropriate M10
hardware or equivalent, supplied by the customer), or it can be pole mounted
using the MBC-07 Mast Bracket Clamp with U-Bolt hardware or strapping/banding
for metal poles (strap mounts). Note that the U-Bolt hardware or strapping is to
be supplied by the customer. See Fig. 1 for the 2-Axis Adjustable Mast Bracket
BOM. Refer to Antenna Installation Guide. See Fig. 8 for mounting using M6
hardware, and Fig. 9 (backwards compatibility with MBK-08) for mounting using
M5 hardware. .
The installation, maintenance, or removal of an antenna requires qualified, experienced personnel. You must refer to the appropriate local safety codes and ensure proper electrical and electromagnetic
compatibility before proceeding with the installation. All local codes shall take precedence over information in this document. Antenna systems should be inspected once a year by qualified personnel
to verify proper installation, maintenance, and condition of equipment. Communication Components Antennas Inc. disclaims any liability or responsibility for the results of improper or unsafe installation.
Adjustable Mast Bracket Installation Guide MBK-14
Fig. 2: 2-Axis Adjustable Mast Bracket Shown With
Horizontal Alignment at 0°
Step Task
2
The 2-Axis Adjustable Mast Bracket is shown with horizontal alignment at 0° mechanical
tilt in Fig. 2, and 45° mechanical tilt in Fig. 3.
DISCLAIMER:
Fig. 3: 2-Axis Adjustable Mast Bracket Shown
With Horizontal Alignment at 45°
50-000085-01 Installation Guide
1