Advertisement
777 Oakmont Lane, Ste. 800
Westmont, IL 60559
1.800.323.9114 • Outside U.S. 1.630.590.6990
www.simplexmechanicals.com
IMPORTANT - READ CAREFULLY
This manual contains important information about the correct installation, operation and maintenance of this equipment. All persons involved
in the installation, operation and maintenance of this equipment must be thoroughly familiar with the contents of this manual. To safeguard
against the possibility of personal injury or property damage, follow the recommendations and instructions of this manual. Keep this manual for
reference.
WARRANTY STATEMENT
SIMPLEX products are warranted to be free of defects in materials and workmanship under normal use for as long as the original purchaser
owns them, subject to the guidelines and limitations listed. This warranty does not cover: normal wear & tear, cosmetic items, abuse, overload-
ing, alterations, improper lubrication, or use in a manner for which they are not intended. If the customer believes a product is defective, the
product must be delivered, or shipped freight prepaid, to the nearest SIMPLEX Authorized Service Center for evaluation and repair.
RECEIVING INSTRUCTIONS
Important! Make sure to inspect all of the components for shipping damage. If damage is found, notify carrier at once. Shipping damage will
not be covered by warranty. The carrier is responsible for all loss associated with shipping damage.
English:. . . . . . . . . . . . . . . . . 1-4
Deutsch: . . . . . . . . . . . . . . . . . 5-8
Safe Operating Procedures and Precautions ................................................................................................................................ 1.0
Technical Specifications ................................................................................................................................................................ 2.0
Jack Operating Instructions ........................................................................................................................................................... 3.0
Maintenance & Lubrication ............................................................................................................................................................ 4.0
-
-
Note
This Operational Manual is intended as a technical guideline only. SIMPLEX accepts no liability for any use or reliance made of any information
in this Operational Manual. All information, illustrations and specifications in this Operational Manual are based on the latest information
available at the time of publication. SIMPLEX reserves the right to make changes at any time without notice. Equipment operators and installers
shall be responsible for ensuring that a safe working environment and safe systems of work are in place before operating the equipment.
©2011 SIMPLEX
LOADBINDER JACKS
INDEX
Dutch . . . . . . . . . . . . . . . . . . 9-12
Italiano . . . . . . . . . . . . . . . . 13-16
CONTENTS
Operational Manual
Reference # - 54215
Rev. - A
Date - 0711
Español: . . . . . . . . . . . . . . . 17-20
Francais . . . . . . . . . . . . . . . 21-24
SECTION
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Simplex SER10
Summary of Contents for Simplex SER10
- Page 1 WARRANTY STATEMENT SIMPLEX products are warranted to be free of defects in materials and workmanship under normal use for as long as the original purchaser owns them, subject to the guidelines and limitations listed. This warranty does not cover: normal wear & tear, cosmetic items, abuse, overload- ing, alterations, improper lubrication, or use in a manner for which they are not intended.
- Page 2 IMPORTANT: Simplex makes no claim that the jacks covered by this document are suitable for any general or particular use and the user assumes all liability arising therefrom. In addition, to comply with the requirements set forth by ANSI B30.1 Chapters 1-1, 1-2 and 1-3, all jacks should be examined by a qualified person prior to each use for damage, proper lubrication, and wear.
- Page 3 Left/Right Ratchet Inner Radius Width Screw Screw Eye Socket Diameter Length Thickness Length Left/Right Screw Eye SER10 25,9 SER20 1244 29,9 SER30 1548 33,6 SER40 1194 2159 1067 41,7 3.0 JACK OPERATING INSTRUCTIONS Position load binder so it can be operated from the ground or in a manner where your footing is secure. Make sure that the jack is rigidly and se- curely attached at the eyelet connection (1).
- Page 4 ••• 4 ••• TO EXPAND: With the right hand screw positioned to the left of the operator and the pawl (2) properly engaged into the ratchet wheel (3) , rotate handle (4) as shown below to extend clevis eyelets. TO PULL: With the right hand screw positioned to the right of the operator and the pawl (5) properly engaged into the ratchet wheel (6) as shown below, rotat- ing handle (7) to retract clevis eyelets.
Need help?
Do you have a question about the SER10 and is the answer not in the manual?
Questions and answers