Lexus NX450h+ 2022 Owner's Manual, Quick Manual page 73

5 Repeat the steps above to program another device for any of the remaining
®
HomeLink buttons.
Programming a rolling code system
Two or more people may be necessary to complete rolling code programming.
1 Locate the "Learn" or "Smart" button on the
garage door opener motor in the garage.
This button can usually be found where the hang-
ing antenna wire is attached to the unit. The name
and color of the button may vary by manufacturer.
Refer to the owner's manual supplied with the
garage door opener motor for details.
2 Press and release the "Learn" or "Smart" but-
ton.
Perform 3 within 30 seconds after performing 2.
3 Press and hold the desired HomeLink
ton (inside the vehicle) for 2 seconds and re-
lease it. Repeat this sequence (press/hold/
release) up to 3 times to complete program-
ming.
If the garage door opener motor operates when
®
the HomeLink
door opener motor recognizes the HomeLink
signal.
button is pressed, the garage
®
but-
Vehicles with auto anti-glare
▶
inside rear view mirror
®
Vehicles with Digital Rearview
▶
Mirror
Driving Comfort
71