Lexus NX450h+ 2022 Owner's Manual, Quick Manual page 71

Program the HomeLink
Before programming the HomeLink
During programming, it is possible that garage doors, gates, or other devices
●
may operate. For this reason, make sure that people and objects are clear of the
garage door or other devices to prevent injury or other potential harm.
It is recommended that a new battery be placed in the remote control transmit-
●
ter for more accurate programming.
The battery side of the transmitter must be pointed away from the HomeLink
Garage door opener motors manufactured after 1995 may be equipped with
●
rolling code protection. If this is the case, you may need a stepladder or other
sturdy, safe device to reach the "learn" or "smart" button on the garage door
opener motor.
Steps 1 through 3
light will stop flashing and programming will not be able to be completed.
1 Press and release the HomeLink
the HomeLink
2 Point the remote control transmitter for the
device at the rear view mirror, 1 to 3 in. (25 to
75 mm) from the HomeLink
Keep the HomeLink
programming.
®
must be performed within 60 seconds. Otherwise the indicator
®
indicator light flashes orange.
®
buttons.
®
indicator light in view while
®
, perform the following:
®
button you want to program and check that
▶
inside rear view mirror
▶
Mirror
Driving Comfort
®
Vehicles with auto anti-glare
Vehicles with Digital Rearview
buttons.
69