Lexus NX450h+ 2022 Owner's Manual, Quick Manual page 72

Driving Comfort
3 Program a device.
Programming a device other than an entry gate (for U.S.A. owners):
●
Press and hold the remote control transmitter button until the HomeLink
light changes from slowly flashing orange to rapidly flashing green (rolling code) or
continuously lit green (fixed code), then release the button.
● Programming an entry gate (for U.S.A. owners)/Programming a device in the
Canadian market:
Press and release the remote control transmitter button at 2 second intervals, re-
peatedly, until the HomeLink
to rapidly flashing (green) (rolling code) or continuously lit (green) (fixed code).
4 Test the HomeLink
observing the indicator light:
®
● HomeLink
completed. The garage door or other device should operate when a HomeLink
button is pressed and released.
®
HomeLink
●
device is equipped with a rolling code. To complete programming, firmly press and
hold the HomeLink
● If the garage door or other device does not operate, proceed to
rolling code system(→
70
®
indicator light changes from slowly flashing (orange)
®
operation by pressing the newly programmed button and
indicator light illuminates: Programming of a fixed code device has
indicator light flashes rapidly: The garage door opener motor or other
®
button for 2 seconds then release it.
P.71).
Vehicles with auto anti-glare
▶
inside rear view mirror
Vehicles with Digital Rearview
▶
Mirror
Programming a
®
indicator
®