Table of Contents
Advertisement
Installation
Shipment
Unless otherwise specified, the MC Fluid Cooler ships by truck (on flat
bed trailers), which lets you receive, hoist, and install the tower in one
continuous operation. Single-cell coolers ship on one truck. Multicell fluid
coolers, depending on their size, may require more than one truck.
Responsibility for the condition of the fluid cooler upon its arrival belongs to
the trucker—as does the coordination of multiple shipments, if required.
receiving Fluid Cooler
Prior to unloading the fluid cooler from the delivering carrier, inspect the
shipment for evidence of damage in transit. If damage is apparent, note
the freight bill accordingly. This will support your future recovery claim.
Find and remove the installation instruction drawings and bills of material
located in a plastic bag in the collection basin. This information should
be kept for future reference and maintenance purposes.
Hoisting Fluid Cooler
All MC Fluid Cooler models consist of two modules per cell. The upper
module includes hoisting clips at the bottom corners. Hoisting clips on the
lower module are attached to the top at the horizontal cross channels. A
Hoisting-Installation label which has hoisting dimensional information is
located on the side casing near the tower centerline. Remove fluid cooler
modules from the carrier and hoist into place according to the instruc-
tions on the label.
MC Fluid Cooler upper and lower modules must be hoisted and set
Caution
separately. Do not preassemble modules prior to hoisting.
Hoisting clips are provided for ease of unloading and positioning the
Warning
fluid cooler. For overhead lifts or where additional safety is required,
safety slings should also be placed under the fluid cooler modules.
Under no circumstances should you combine the top and bottom
modules of modular models and attempt to hoist them at the same
time by utilizing the hoisting clips alone!
6
Advertisement
Table of Contents
