Related Manuals for Lock4Safe Pulse
Summary of Contents for Lock4Safe Pulse
- Page 1 Pulse Entry Unit Pulse PRO T6630 T6530 T6430-B Lock4Safe BV Lock4Safe BV Maasstraat 3d Boschstr. 16 NL-7071VR ULFT D - 47533 Kleve Technical The Netherlands Germany info@lock4safe.com T +49 (0)2821 894 41 90 Manual www.lock4safe.com F +49 (0)2821 894 41 99...
- Page 2 Features Pulse option: Illuminated keypad: (Item No. (only Pulse with metal housing!) The entry unit Pulse is an analog keypad, suitable to locks with functional scope Home 2 and Home 10. Pulse Pulse- and Pulse PRO option: Pulse- and Pulse PRO option:...
-
Page 3: Mounting Dimensions
Technichal Manual – Entry Unit Pulse/Pulse PRO www.Lock4Safe.com Mounting dimensions 41,50 mm Ø 11 mm These technical manual is part of the VdS recognition and must be strictly observed! - Page 4 Entry Unit Pulse/Pulse PRO – Technical Manual www.Lock4Safe.com Mounting entry unit fix 41,50 mm • Prepare the mounting and cable /spindle holes Ø on the safe door. 11 mm • Deburr the cable hole well so that the cable can cannot be damaged.
- Page 5 Technichal Manual – Entry Unit Pulse/Pulse PRO www.Lock4Safe.com With Straightbolt Lock EM35: Mounting as rotatable entry unit 41,50 mm • Prepare the mounting and cable /spindle holes Ø on the safe door. 11 mm • Deburr the cable hole well so that the cable can cannot be damaged.
- Page 6 Entry Unit Pulse/Pulse PRO – Technical Manual www.Lock4Safe.com • First put the spring into small drilling hole on the backside of the entry unit - then the pen. (a little grease prevents the spring from falling out). • Feed the notched square spindle with cut edge first into the housing of the the entry unit as far as it will go.
- Page 7 Technichal Manual – Entry Unit Pulse/Pulse PRO www.Lock4Safe.com • Hook the entry unit with its rotatable adapters on the backplate (10:00 o‘clock position). • Control cable routing and rotate the entry unit clockwise until it snaps into place (12 o‘clock position (you hear a click).
- Page 8 Entry Unit Pulse/Pulse PRO – Technical Manual www.Lock4Safe.com Pulse PRO Notes Pulse PRO is factory set in a pre-setup mode which simplifies the testing of the system: • Lock open bei pressing key • At the same time the alarm output is activated.