Becker mamba.4 CE LMU Operating Manual page 73

The Format button
In the settings window you can
Format
set the measurement units to be used
for times and distances.
> In the settings menu, press the
button.
The settings window appears.
Format
> Press the
button to switch between
Time
the 12 hour clock and the 24 hour clock.
> Press the
button to switch
Distance
between kilometres and miles.
> Confirm your settings by pressing the
button.
The Time button
You can select the time zone relevant for
your location in the
window. This setting is important for the
correct calculation of the estimated time
Format
of arrival.
> Press
in the settings menu.
Time
The settings window appears.
Time
Using the
Time zone
the time zone
automatically by the Navigationsgerät or
not (
Use auto time zone
off
auto time zone
If the automatic function is switched off,
you can select the desired time zone by
pressing the button below
.
zone
The Reset button
You can reset the navigation settings to
settings their factory settings.
Time
The settings will then be reset. The fast
access mode data, stored routes,
blocked routes, voice and home address
are retained.
> Press the
> Press the
you can set whether
should be set The navigation settings are reset to their
factory settings.
on or
Use
).
Use auto time
NAVIGATION MODE
button.
Reset
button.
Yes
>>>
73