During Use; After Use; Before Use - Skil 6271 Original Instructions Manual

Maintain power tools. Check for misalignment or
binding of moving parts, breakage of parts and any
other condition that may affect the power tool's
operation. If damaged, have the power tool repaired

before use.

maintained power tools.
Keep cutting tools sharp and clean.
maintained cutting tools with sharp cutting edges are less
Use the power tool, accessories and tool bits etc., in
accordance with these instructions, taking into
account the working conditions and the work to be
performed.
5) SERVICE
Have your power tool serviced by a qualified repair
person using only identical replacement parts. This
SAFETY INSTRUCTIONS FOR IMPACT DRILLS
GENERAL
making any adjustment or changing any accessory
Wear ear protectors
Use auxiliary handle(s), if supplied with the tool
Do not work materials containing asbestos (asbestos
wear a dust mask and work with a dust
extraction device when connectable
work with a dust extraction device when
connectable
BEFORE USE
Use suitable detectors to find hidden utility lines or
call the local utility company for assistance (contact
wear a dust mask and
Secure the workpiece (a workpiece clamped with
ACCESSORIES
when original accessories are used

DURING USE

tool
Hold the power tool only by the insulated gripping
surfaces when performing an operation where the
accessory may contact hidden wiring or its own
power cord

AFTER USE

standstill
USE
4
low to high
- switch on the tool
- lock the switch
! change direction of rotation only when tool is at a
complete standstill
! select drilling function only when tool is switched
off and plug is disconnected
0
- insert the bit as deep as possible in the chuck
! do not use bits with a damaged shank
8
5
6
7
8
9
!
2