Realistic HTX-100 Service Manual page 12

3. Alignment Procedure (Cont.)
Step
Preset to Adjustment Remarks
Connect the oscilloscope and the frequency counter to TP
12
Mode: TX, CW
VR304
304.
S.S.G.: 29 MHz
Adjust VR 304 for 38.695 MHz
±
20 Hz reading on the fre-
quency counter.
Connect the oscilloscope and the frequency counter to TP
Mode: RX, CW
301.
13 No alignmen 1 Check if the frequency is 38.695 MHz
±
1.0 -
±
2.0 kHz when
S.S.G.: 29 MHz
turn the RIT volume to fully clockwise from fully counterclock-
wise.
4. Test Equipment Connection
P.T.T.
Transceiver
501l.Lood
EJITJ
DC Power Supply
13.8V
o
Oscilloscope
-11-
Frequency
Counter