Table of Contents
Advertisement
FAULT
Whitish stains remains
on dishes.
Dishes do not dry.
Rust stains form on the
dishes.
Detergent remains in the
detergent compartment.
POSSIBLE CAUSE
Not enough detergent used.
Rinse aid dosage and/or water
softener setting set too low.
High water hardness level.
Drying option is not selected.
Rinse aid dosage set too low.
Stainless-steel quality of the dishes
is insufficient.
A poor mains grounding.
Detergent was added when the
detergent compartment was wet.
EN - 24
TROUBLESHOOTING
Use the correct amount of detergent, as
instructed in the programme table.
Increase rinse aid and/or water softener
level.
Increase water softerner level and add.
Select a programme with a drying option.
Increase rinse aid dosage setting.
Use only dishwasher-proof sets.
Consult a qualified electrician immediately.
Make sure detergent compartment is dry
before use.
Advertisement
Table of Contents
