Downloading The Cfx3 App; Setting The Bluetooth Signal And Connecting To The App; Setting The Wifi Signal And Connecting To The App - Dometic CFX3 Operating Manual

CFX3
Cleaning and drying the ice maker
• When not in use clean and dry the ice trays and inside the ice maker housing to
prevent mould.
• Following extended periods of non-use clean the inside of the ice trays with a
mild dish washing solution and rinse with clean water prior to use.
7.14

Downloading the CFX3 app

The cooler can be monitored and controlled via Bluetooth or WiFi using an app that
you can install on a compatible device.
➤ Download the CFX3 app from App Store or Google Play.
Note that the CFX3 app may not be available in your country.
7.15 Setting the Bluetooth signal and connecting to the
app
The cooler can be monitored and controlled via Bluetooth. To do so, you have to
pair the cooler with your Bluetooth device.
I
NOTE
• Pairing must be done within the CFX3 app, not in device settings.
• There is no password required for Bluetooth connection.
➤ Proceed as shown (fig. m, page 14).
7.16

Setting the WiFi signal and connecting to the app

The cooler can be monitored and controlled via WiFi direct to cooler or via a
WiFi network.
1. Proceed as shown (fig. n, page 15) to turn WiFi on.
2. For WiFi direct to cooler, go to device settings and select your cooler.
– The WiFi name of your cooler begins with "CFX3".
– The preset password is "00000000".
– You can personalise the WiFi name and the password in the CFX3 app.
I
NOTE
For connection via WiFi network, go to "network connection" in the app
SETTINGS.
EN
Operation
31