Step 3 : Connecting The Vcr; If Your Tv Does Not Have A Scart (Euro-Av) Connector - Sony SLV-X9G Operating Instructions Manual

Step 3 : Connecting the VCR

If your TV has a Scart (EURO-AV) connector, see page 15.
• Connection to your TV with an aerial cable only, see this page.
• Connection to your TV and Set-Top Box, see page 17.

If your TV does not have a Scart (EURO-AV) connector

Mains lead
to mains
: Signal flow
1
2
3
Note
• When you connect the VCR and your TV only with an aerial cable, you have to
tune your TV to the VCR (see page 21).
14
Connecting the VCR
Disconnect the aerial cable from
your TV and connect it to
AERIAL IN on the rear panel of
the VCR.
Connect AERIAL OUT of the
VCR and the aerial input of your
TV using the supplied aerial cable.
Connect the mains lead to the mains.
AERIAL IN
AERIAL OUT
AERIAL IN
Aerial cable (supplied)
AERIAL
ANTENNE
IN
ENTREE
OUT
SORTIE
AERIAL
ANTENNE
IN
ENTREE
OUT
SORTIE