Table of Contents
Advertisement
3.9
Set the screen off time of the Parent Unit
You can set the screen off time of the Parent Unit after being in idle mode for a
particular time interval.
1. Press
when the Parent Unit is not in use.
2. Press < or
3. Press
or
4. Press O to confirm your selection.
3.10 Zoom
You can zoom in or out while viewing the image from Baby Unit.
1. Press
to zoom in.
2. Press and hold <,
downward, leftward or rightward correspondingly.
3. Press
to zoom out.
3.11 Pair and replace extra new Baby Unit
The Baby Units and Parent Unit provided are already paired. You can add or
replace a Baby Unit in your video and audio monitoring system.
You can pair a maximum of four Baby Units to your Parent Unit. Each new Baby
Unit must be paired to the Parent Unit before use.
To pair and replace a Baby Unit:
1. Press
when the Parent Unit is not in use.
2. Press < or
3. Press
or
pairing mode starts.
4. Turn on the new Baby Unit, and then immediately press and hold
the Power/Link indicator turns on.
NOTE
If you choose an occupied Baby Unit slot, the new Baby Unit will replace the
existing Baby Unit.
Using Your Baby Monitor
to scroll to
.
60m
select (
,
,
or
to move the zoomed image upward,
to scroll to
.
to choose a desired Baby Unit slot, then press O. The
30m
5m
OFF
,
or
).
Pair
until
15
Advertisement
Table of Contents
