IFU_EV7009-1800116778.qxd:Sunshine
QUICK START GUIDE
28/08/09
9:30
Page 3
1 Installation
•
Place your appliance on your night table.
•
Plug the power cord in.
To start with, you can simply set the time and the alarm.
2 Setting the time
•
Press button (2)
once: the hour digits blink.
•
Then press the + or - buttons (5 or 6) to scroll the hours.
•
Press button (2)
again to freeze the hours and move on to setting the minutes.
•
The minute digits blink.
•
Press the + or - buttons (5 or 6) to scroll the minutes.
•
Press button (2)
again to freeze the minutes.
Now the time is set.
3 Setting the alarm time
•
Press button (3)
once: the hour digits blink.
•
Then press the + or - buttons (5 or 6) to scroll the hours.
•
Press button (3)
again to freeze the hours and move on to setting the
minutes.
•
The minute digits blink, then press the + or - buttons (5 or 6) to scroll the minutes.
•
Press button (3)
again to freeze the minutes.
Now the alarm time is set.
4 Setting the type of alarm
Choosing the wakeup mode:
Now you can choose how you wish to be woken up: simply press the
button of your choice:
•
Button (7)
= Invigorating wakeup setting.
•
Button (8)
= Gentle wakeup setting
•
Button (9)
= Personalised wakeup setting (see instructions)
5 Choosing a programme:
•
When you choose the Gentle wakeup
by progressively brighter light over a 45-minute period, followed by the soft
tones of a wind chime, birds singing or sea and waves.
•
When you choose the Invigorating wakeup
awoken by progressively brighter light over a 15 minute period, followed by
a tonic sound: percussions or a Tibetan Gong.
•
When you choose the Personalised wakeup
depending on your preference, with progressively brighter light over a 15-,
30- or 45-minute period, followed by the sound of your choice or the radio.
For the adjustments refer to the instructions in chapters 8, 9 and 10.
programme you will be awoken
programme you will be
programme you will awake,
EN