Graco Matrix 249269 Instruction Manual
  1. Manuals
  2. Brands
  3. Graco Manuals
  4. Test Equipment
  5. Matrix 249269
  6. Instruction manual
Graco Matrix 249269 Instruction Manual

Graco Matrix 249269 Instruction Manual

Rf signal tester
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Instruction Manual
RF Signal Tester
Part No. 249269, Series A, North America (N.A.)
Part No. 249880, Series A, Australia
Used to evaluate the Matrix RF signal quality in a new or existing Matrix facility.
Important Safety Instructions
Read all warnings and instructions in this
manual. Save these instructions.
FCC ID: JHIGNET
IC: 4840AGNET
Industry Canada Statement
The term "IC" before the certification/reg-
istration number only signifies that the
Industry Canada technical specifications
were met.
Graco Inc. P.O. Box 1441 Minneapolis, MN 55440-1441
Copyright 2005, Graco Inc. is registered to I.S. EN ISO 9001
http://gracomanual.com
✓
Australian Vendor Code: N3845
311002C
EN
TI6745A

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Matrix 249269 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Graco Matrix 249269

Summary of Contents for Graco Matrix 249269

  • Page 1 Industry Canada Statement The term “IC” before the certification/reg- istration number only signifies that the Industry Canada technical specifications were met. Graco Inc. P.O. Box 1441 Minneapolis, MN 55440-1441 Copyright 2005, Graco Inc. is registered to I.S. EN ISO 9001 http://gracomanual.com...

  • Page 2: Table Of Contents

    Battery Life Indicator ..... . 5 Graco Phone Numbers ..... 12 Operation .

  • Page 3: Warnings

    Warnings Warnings The following general warnings are related to the safe setup, use, grounding, maintenance and repair of this equip- ment. Additional more specific warnings may be found throughout the text of this manual where applicable. WARNING FIRE AND EXPLOSION HAZARD When flammable fluids are present in the work area, such as gasoline and windshield wiper fluid, be aware that flammable fumes can ignite or explode.

  • Page 4: Overview

    (E) and pulling the battery (F) out and away from the Signal Tester. See F . 1. 2. Place the battery in the Graco Matrix battery char- ger. See Instruction Manual 309502 for details. TI6746A 3. Replace the battery by pressing in on both battery lock buttons (E) and pushing the battery (F) into the Signal Tester.

  • Page 5: Display Functions

    Signal Tester is used and the battery discharges. All Matrix signal tester batteries TRIGGER TO START should be re-charged using a Graco Matrix battery char- ger at the end of the working day to assure good perfor- PROGRAM mance the next day.

  • Page 6: Select Network And Transceiver Id

    Operation Select Network and Transceiver ID If the PROGRAM screen is selected during an RF signal test, the test will stop. The testing then must If necessary to determine the Transceiver dipswitch set- be manually restarted. tings see Determining Transceiver Dipswitch Set- tings on page 8 for a guide.

  • Page 7: Optional Display Information

    Operation GOOD SIGNAL: If over several test intervals the result Optional Display Information Explanation is consistently a GOOD SIGNAL, the location is within Each test interval sends 10 messages to the Trans- the range of the Transceiver for reliable communication. ceiver.

  • Page 8: Determining Transceiver Dipswitch Settings

    Determining Transceiver Dipswitch Settings Determining Transceiver Dipswitch Settings Each Transceiver is equipped with two, 4 - position dip- Existing Matrix Facility - If the Transceiver is already switches labeled S1 and S2 representing the network ID installed, two large letters should be visible on the out- (S1) setting and the Transceiver ID (S2) setting.

  • Page 9: Dipswitch Setting Using Rs422 Connection

    Determining Transceiver Dipswitch Settings Dipswitch Settings using RA232 Connection. S2 Transceiver ID A - default S1 Network ID A - default Dipswitch Setting using RS422 Connection S2 Transceiver ID S1 Network ID . 10 311002C...

  • Page 10: Parts For 249269 And 249880 Matrix Rf Signal Tester

    Parts for 249269 and 249880 Matrix RF Signal Tester Parts for 249269 and 249880 Matrix RF Signal Tester TI6747 Battery is rechargeable and requires a Graco Matrix Battery Charger for recharging. See Instruction Manual 309502. Ref. No. Part No. Description Qty.

  • Page 11: Technical Specifications

    Technical Specifications Technical Specifications Operating temperature range ........32° F to 120° F (0° C to 49° C) Storage temperature range.

  • Page 12: Graco Standard Warranty

    With the exception of any special, extended, or limited warranty published by Graco, Graco will, for a period of twenty-four months from the date of sale, repair or replace any part of the equipment determined by Graco to be defective.

This manual is also suitable for:

Matrix 249880

Table of Contents