Advertisement
Download the Aquatic VITA app
on your smart device
AquaticVITA app
Install LED Light
- Slide adjustable docking legs on each side of light fixture to
match the length of your aquarium.
- Connect the 3-pin plug on the light fixture to the matching
3-pin plug on the LED controller,
- Connect the male DC plug from the power supply to the LED
controller.
- Plug power supply into a GFCI protected AC outlet ensuring a
drip loop is in place.
Adjust docking mounts
to fit aquarium
GFCI Protected
12V DC
AC Outlet
Power
Supply
LED
Controller
Ensure use of drip
loop for all cables
- Place fixture over glass top of aquarium and adjust docking
mounts as needed to fit tank.
You are now ready to use the LED light via the
inline LED controller.
To activate smart mobile app features, proceed to steps
4 & 5. When in Smart Wi-Fi pairing mode, the LED light
will blink. Note: the light will stop blinking after 3 minutes
or when controlled via the inline controller.
LED Controller Button:
WARNING:
LED Controller is NOT waterproof.
Keep in a dry place away from
dripping water or where it may
drop into water.
Main control features:
- Press once (1x) to turn ON, light will display
default White color spectrum (all colors 100%).
- Press and hold button 3 seconds to turn
light OFF.
*To reset controller for pairing with the Vita app
and mobile device, press and hold button for
9 seconds - LED light will blink red when ready
for pairing and connection.
Manual Scene control:
- Press 2x to display Sunrise fade scene.
- Press 3x to display Sunrise fade scene.
- Press 4x to display Moonlight fade scene.
- Press 5x to display Rainstorm scene.
- Press 6x to display Partly Cloudy scene.
- Press 7x to display Sunset scene.
- press 8x to display Glow scene.
- Press 9x to display Stream scene.
- Press 10x to display Deepwater scene.
Launch and use the Aquatic VITA
app to complete the set up.
- Open the VITA app.
- Complete the requested information to
create a new account, or sign into your
existing account.
Tap Add Device or the + sign, then select
"ColorPlus Aquarium LED" and confirm. Then
enter your Wi-Fi network & password.
Light must be rapidly
VITA
blinking to connect. If not
already blinking, press and
hold the button on the
controller for nine seconds
to put light in pairing mode.
LED controller will then pair with your mobile
device (this can take 30-60 seconds).
(OPTIONAL) Connect to Alexa or Google
Assistant using the in App guide
Tap the
EDIT icon.
For more information, check the App User Guide at
www.aquaticvita.com for help
Or email us at info@current-usa.com
.
Advertisement
