Time Operation; Carrier Operation; Search Operation; Adding Or Remove Channels From The Scan List - BTECH GMRS-V2 Manual

VISIT BAOFENGTECH.COM AND MIKLOR.COM FOR DOWNLOADS AND HELP 37
In Time Operation (TO) mode, the scanner stops when it detects a signal, and after a factory pre-
set time out, it resumes scanning.
In Carrier Operation (CO) mode, the scanner stops when it detects a signal, and after a factory
preset time with no signal it resumes scanning.
In Search Operation (SE) mode, the scanner stops when it detects a signal.
To resume scanning you must press and hold the

Adding or Remove Channels from the Scan List

You can configure channels to be added or removed from the scanning list on the fly.
1. Select the channel you want to add to the scan list.
2. Press the
3. Enter
4. Press the
5. Use the and
scanning list.
6. Press the

Time Operation

Carrier Operation

Search Operation

key to enter the menu.
on your numeric keypad to come to scanning add (SC-ADD) mode.
key to select.
keys to select if the channel will be added or removed from the
key to confirm and save.
key again.