Subscribe to Our Youtube Channel
Related Manuals for JWA AZALEA 68216
Summary of Contents for JWA AZALEA 68216
- Page 1 ASSEMBLY INSTRUCTION AZALEA Outdoor Lounge Chair ITEM CODE:68216 Imported by JWA Furniture Pty Ltd, Qld, Brisbane Australia. For any assistance with assembly or for missing parts please refer to your receipt...
-
Page 2: Pre-Assembly Preparation
PRE-ASSEMBLY PREPARATION Before you start: 1. Choose a clean, level, spacious assembly area. Avoid hard surfaces that may damage the product 2. Take care when lifting. Product should be assembled as near as possible to the point of use 3. Ensure that you have all required contents for complete assembly 4. -
Page 3: Parts List
PARTS LIST... - Page 4 You will need Step 1 • Prepare a floor or benchtop with a protective blanket or carboard. • Prepare 4 bolt sets. Thread bolt(B) through Washer(C). • Connect Left Arm(2) to the Seat(3), as shown below. • Secure with 2x bolt sets. Use Allen Key(D). •...
- Page 5 You will need Step 2 • Prepare 4 bolt sets. Thread bolt(B) through Washer(C). • With the aide of a 2 person flip the chair over. • Connect the backrest(4) to the seat arms, as shown below. NB the braces are on the top side. •...
- Page 6 You will need Step 3 • Prepare 4 bolt sets. Thread bolt(B) through Washer(C). • Connect the fixed link(5) to the seat arms, as shown below. • Secure with 2x bolt sets. On each arm. Use Allen Key(D). • Tighten only until the bolt is a little firm in the thread, do not fasten completely.
- Page 7 Step 4 • Stand the chair up the right way. • Push down on the chair until it levels out. Do not lean beyond your own balance. • Once level, turn the table back over, fully fasten all the bolts with Allen Key(D).
Need help?
Do you have a question about the AZALEA 68216 and is the answer not in the manual?
Questions and answers