Liquiline CM44x Modbus Guideline V1.0
5.4.1. AI Analog values (Device Modbus)
Path: Menu/Setup/Outputs/Modbus/AI 1 (Analog Input)
Function
Option
Data source
Select data source
•
Default setting
•
Measured value
Select measured value
•
Default setting
•
The device variables are configured accordingly to the given example of configuring the device variable 0 (Analog
Input AI1) to the analog current input of the CSF22.
Step 1
Step 5
Step Description
1
Select the device variable
2
3
Select the source of data
4
Select the measured value of this source of
5
data
6
7
Verify the assignment
5.4.2. DI Digital values (Device Modbus)
Path: Menu/Setup/Outputs/Modbus/DI 1 (Digital Input)
Function
Option
Data source
Select data source
•
Default setting
•
16
Description
Which data sources are in the list depends of the device
configuration.
any of the list
none
The available measured value depends of the data
depending of
source
none
Step 2
Step 6
Description
Which data sources are in the list depends of the device
configuration.
any of the list
none
Step 3
Step 7
Example
Press "AI 1 (Analog Input)"
Press "Source of data"
Press e.g. "Temperature S:1"
Press "Measured value"
Press e.g. "Temperature"
Press "Modbus assignment view"
Check assignment of "AI 1 (Analog Input)"
Step 4
Endress+Hauser
© Copyright Dez. 2011