Filling The Hopper Bin - C-lock GreenFeed Instruction Manual

5.3.

Filling the Hopper Bin

To fill the feed bin, remove the two latches on either side of the bin, then remove the lid.
Once the bin is filled, replace the lid and tighten the latches. Do not leave the lid off during
normal operation, as food can become wet and clog inside the feed hopper.
Figure 13) Removing the Feed Bin Lid
The hopper is designed to handle 7mm or smaller pelletized feed. Feed types larger than
7mm will likely not dispense properly. Powered feed, large pellets, and straw type feed
should not be used in GreenFeed. Using "dusty" feed will result in more frequent air filter
changes. If you are unsure if your feed will work in GreenFeed, please contact
support@c-lockinc.com.