Maintenance; Cleaning The Head Position Sensor - C-lock GreenFeed Instruction Manual

5. Maintenance

5.1.

Cleaning the Head Position Sensor

The head position sensor is located directly above the edge of the feed dish. From time to
time, this sensor will become dirty due to animals and debris. It is important to keep the
lenses clean on this sensor. Use a dry cotton swab to remove any debris from the two
lenses. If a dry cotton swab cannot remove all the debris, use a lightly wetted cotton swab. It
is recommended to clean this sensor once per week.
Figure 12) Location of the Head Proximity Sensor