Frequently Asked Questions - Miele Complete C2 Hardfloor PowerLine SFAE0 Operating Instructions Manual

Frequently Asked Questions

With the help of the following guide minor faults in the performance of the ma-
chine, some of which may result from incorrect operation, can be remedied with-
out contacting the Service Department.
This guide may help you to find the reason for the fault, and how to correct it.
Problem
The vacuum cleaner
turns off automatically.
Possible cause and solution
A temperature limiter switches the vacuum cleaner
off automatically if it gets too hot.
This can occur if, for instance, large objects block the
suction wand or when the FilterBag is full or contains
particles of fine dust. A heavily soiled motor protec-
tion filter or exhaust filter can also be the cause of
overheating.
 Switch the vacuum cleaner off immediately using
the On/Off foot switch . Unplug from the electri-
cal socket.
After removing the cause of the fault, wait for approx-
imately 20–30 minutes to allow the vacuum cleaner
to cool down. It can then be turned on again.
27