Miele Complete C2 Hardfloor PowerLine SFAE0 Operating Instructions Manual page 24

If you wish to fit the AirClean Plus 50,
Active AirClean 50, or HEPA AirClean
50 exhaust filter, see "Replacing one
type of exhaust filter with another".
 Close the filter grille.
 Close the dust compartment lid.
Replacing the AirClean Plus 50, Ac-
tive AirClean 50, and HEPA AirClean
50 exhaust filters
Do not use more than one exhaust fil-
ter at a time.
 Open the dust compartment lid.
 Lift the exhaust filter and remove it.
24
 Insert a new exhaust filter, making
sure it goes in properly, then push it
down into position.
 If you are using exhaust filter c or d,
press the TimeStrip® exhaust filter
change indicator.
After approx. 10–15 seconds, a thin red
line will appear in the left hand side of
the display for both exhaust filters.
If you wish to fit the AirClean exhaust
filter, see "Replacing one type of ex-
haust filter with another".
 Close the dust compartment lid.