Download
Share
Print this page
Omron HV-F 128 Quick Start Manual
  1. Manuals
  2. Brands
  3. Omron Manuals
  4. Personal Care Products
  5. HV-F128
  6. Quick start manual

Omron HV-F 128 Quick Start Manual

Hide thumbs Also See for HV-F 128:
1
2
3
4
5
6
7
8

Advertisement

Quick Links

Download this manual
How to use TENS device (Omron HV-F 128)
Info and figures are selected from the public access website:
https://www.omronhealthcare-ap.com/Content/uploads/products/
355bb601fa1d40f4a15ecba67cfa3bbf.pdf
How to Insert Batteries
1. Turn the Intensity Adjustment Dial/Power Switch to the "OFF" position.
2. Open the battery cover on the back of the main unit.
3. Insert batteries according to the polarities shown in the battery compartment.
4. Close the battery cover.
General advice on the handling of batteries
•
The supplied batteries are prepared for this study only.
•
Insert the batteries with the polarities (+ and –) in correct alignment.
•
Battery Life is approx. 3 months: when used 15 minutes a day continuously.
•
If you feel the massage stimulation is weak, the batteries may be worn. Replace the
batteries with new ones.
A
Figure 1
B
1

Advertisement

loading

Related Manuals for Omron HV-F 128

Summary of Contents for Omron HV-F 128

  • Page 1 How to use TENS device (Omron HV-F 128) Info and figures are selected from the public access website: https://www.omronhealthcare-ap.com/Content/uploads/products/ 355bb601fa1d40f4a15ecba67cfa3bbf.pdf How to Insert Batteries 1. Turn the Intensity Adjustment Dial/Power Switch to the “OFF” position. 2. Open the battery cover on the back of the main unit.
  • Page 2 How to Connect the Electrode Cord (Figure 1A) 1. Turn the Intensity Adjustment Dial/Power Switch to the “OFF” position. 2. Connect the Electrode Cord with the Main Unit. Insert the Electrode Cord Plug into the Electrode Cord Jack. 3. Connect the Electrode Cord to the Electrode Pads as described below. When using the unit for the first time (Figure 1B) •...
  • Page 3 How to Apply Electrical Stimulation (Figure 3) 1. Turn on the power. - Rotate the Intensity Dial/Power Button downwards. When you hear a click, the power is turned on and the stimulation starts. - The special mode of KNEAD, REPEAT and WIDE has been pre-set by the research team. These parameters provide 25 Hz pulses with 4-second stimulation and 1-second pause cycle.
  • Page 4 TENS again. Otherwise, discard applying TENS of that day. If the Pad does not stick anymore, please contact the research team to get the new Pad. 3. Adjust the intensity of stimulation. - For the first use, it is better to rotate slowly the Intensity Dial/Power Button from level 1 to 6 within 30-60 seconds.
  • Page 5 Troubleshooting If you have any problems, please contact us at Tel: 022-1843224 (24/7 available on a mobile phone) or you can check the Troubleshooting in the Instruction Manual (Omron-TENS Therapy Device) page 22 for remedial action advised. Live and Video Tutorial Please watch the video tutorial before the zoom meeting.
  • Page 6 Figure 5. The package contains one TENS device, two electrode pads, a practicing model, and a measuring container for urine volume measurements (25 - 500 ML).
  • Page 7 Figure 6. A live tutorial and video clip of using TENS on a dummy (mannequin torso) with silver strips demonstrating the gluteal fold (the junction between the back of upper thigh and buttock).
  • Page 8 Figure 7. Live practice applying TENS therapy on the practice model, plastic sheet with silver strips representing the gluteal fold or the junction between the back of upper thigh and buttock. Figure 8. Illustration of real use of applying electrode pads along the gluteal fold directly on the skin (NO need of silver strips).