Led Indication; Troubleshooting - LG HBM-290 User Manual

Function HBM-290 Status
Power on
Power off
Pairing mode
Headset / Hands-Free /
A2DP profiles connected The LED will flash twice every 5 seconds.
Operating
Call connected
Out of range
Charging
Charging
Charging complete
Issue
Does not turn on
Unable to
communicate with
the LG HBM-290
Unable to pair the
HBM-290 with
Bluetooth device
®
Low sound (speaker) Check the speaker volume.
Cannot to hear audio
streaming
The LED will flash 4 times.
The LED will flash 4 times and then turns off.
The LED stays on.
The LED will flash twice every 5 seconds.
For the first 15 minutes after the devices are
disconnected the LED will flash twice every 5
seconds. After that it will flash once every 5 seconds.
The RED LED stays on.
The RED LED turns off.
Possible problem
Check whether the battery of
the HBM-290 is fully charged.
Check whether the device
supports the headset or
hands-free Bluetooth profiles.
Check whether the battery of
the HBM-290 is low.
Check and make sure the
headset is on.
Check and make sure the
headset is placed in pairing
mode.
Check whether other device
is streaming.

LED indication

Action

Troubleshooting

Resolution
Charge the battery.
Determine whether your device
supports the Headset or Hands-
free Bluetooth profiles.
Charge the battery.
Press and hold the POWER
button for at least 3 seconds to
turn on the headset.
With the power off, press and hold
the POWER button for 6 seconds
to manually place the headset in
pairing mode.
lncrease the volume level.
Stop other device streaming.
9