LG HBM-290 User Manual page 5

Easy Pairing (First Time Pairing)
1. Press and hold the POWER button for 3 seconds to turn on the HBM-290. When
the headset enters Pairing Mode, the LED indicator will show a solid blue light.
2. Using your handset, find the Bluetooth Menu and "search for" or "add" new
devices.
• Select "LG HBM-290" from the list of devices and pair it with your handset.
3. If asked for the Pass/PIN code please enter "0000" (4 Zeros).
* Note : If your handset supports Secure Simple Pairing (SSP), you will not need to
enter Pass/PIN code.
• Once pairing has completed successfully, you will hear "Headset paired.".
4. Some handsets might ask for permission to access the phone's contact list. If you
receive a message from your handset, please select "OK" or "Allow access"
• The HBM-290 will automatically turn off if not paired within 3 minutes.
Manual Pairing (Pairing with another phone or re-pairing)
• With the power off, press and hold the POWER button for 6 seconds.
• When the headset enters Pairing Mode, the LED indicator will show a solid blue
light. After the procedure repeat Easy Pairing steps 2 through 4.
Multi-connection
Advanced Multipoint
The HBM-290 is capable of having two devices connected to the headset at the
same time. This will give you the freedom of using call waiting between calls on
both of your connected phones.
Connection
- Pair the headset with one of your Bluetooth-enabled phones. (per the pairing
instructions on page 5).
- Turn the headset off and use the Manual Pairing method as described on page 5
to enter Pairing Mode.
- Now, pair and connect the headset with your other Bluetooth-enabled phone.
(This will be your primary phone).
How to Use
5