Technical Points - Samsung WA1635D0DW/XAP Service Manual

2. TECHNICAL POINTS

2-1 KEY DISPLAY
2-2 FUNCTION OF CONTROL KEYS
1.COURSE KEY
(1) Before the initial start key is entered or during the pause mode, each pressing of this key shows the
selectable courses as in the order below.
FUZZY → JEAN → ECONO WASH → WOOL → BLANKET
(2) Each time you press the key whilst in valid operation, it gives a beep sound for each key-in but it does not
perform any corresponding action.
(3) When you press HOLD key and change the course while the selected course is valid and in normal
operation, the course selected at last resets the current settings as its default initial values even if you
changed the course (wash, rinse, spin) by using the Manual key.
(4) When the selected course is valid and in normal operation, pressing any key is valid except for the Course
Selection key. But in case of spin process, only the START/HOLD key and the Power key are valid.
(5) Weight sensing function is valid only for fuzzy, heavy dirt, econo course (over the low water level)
DEFAULT value for heavy dirt course is low water level.
Water level key touch changes the mode as follows.
Low → Middle → High
DEFAULT value for blanket course is middle water level.
Water level key touch changes the mode as follows.
High → Middle
Initial key-in for other course is middle water level.
D