Table of Contents
Advertisement
Quick Links
ZP3 Programming Menu Buttons
©G2 Security (Pty) Ltd
ZP3 Planner Quick Guide
Menu
key
1 Operator
2 Maintenance
3 Setup
Setup and maintenance menus will request access
codes to proceed. Default is code 2000*
(3000 and 4000 can also be used)
Enter
key
Saves, accepts or selects
Escape
key
Moves back by one menu level
Home
key
Exits out of the menus, saving configuration
changes and returns to main screen.
Up / Down Arrow
Changes selected option
keys
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for G2 ZP3
Summary of Contents for G2 ZP3
- Page 1 ZP3 Planner Quick Guide ZP3 Programming Menu Buttons Menu 1 Operator 2 Maintenance 3 Setup Setup and maintenance menus will request access codes to proceed. Default is code 2000* (3000 and 4000 can also be used) Enter Saves, accepts or selects...
- Page 2 Panel Type Panel type is best found by opening the door and counting the loops – it will be a ZP3 EN4 either 1, 2 or 4 loop. Set Z-Port 1 to work with Planner Select 3 [Setup] > 6 [System Configuration]> 3 [Peripheral Comms] > 1 [Comms Parameters] Set Protocol Down arrow >...
- Page 3 In Planner Start Planner and Create a new project (must give it a project name) Add basic panel details In Panel Details: • Panel number • Panel type • Software version...
- Page 4 And select Save Changes button to add the new panel. Set up communications ports Inside Global Settings within Comms Settings: • ZPORT 1 Protocol ZCP3/Planner • Set Baud rate to 9600 You will also need to set the comm ports of your laptop or PC that Planner needs to work through.
- Page 5 In Planner Back in Link menu you can now Send Data to Panel and Receive Data from Panel.
Need help?
Do you have a question about the ZP3 and is the answer not in the manual?
Questions and answers